Recall Only Memories In The Same Frequency Band (Band) Using The Memory Auto Grouping (Mag) Function - Yaesu FTM-500DR Operating Manual

Displaying a list of memory channels in memory mode
Turning the DIAL knob in memory mode usually increases or decreases the mem-
ory channel number. Rotating the DIAL knob automatically displays the memory
channel list and allows you to recall the desired memory channel while checking the
contents of multiple memory channels.
1. Press and hold the FUNC knob.
2. Touch [21 MEMORY LIST MODE].
Or rotate the FUNC knob to select the [21 MEMORY LIST MODE], and then
FUNC knob.
3. Rotate the FUNC knob to set "ON".
4. Press the DIAL knob, SUB DIAL knob or PTT switch to save the settings and
return to normal operation.
To return to normal up / down operation, set "OFF" in step 3 of the above operation.
Recall only memories in the same frequency band (Band)
using the memory auto grouping (MAG) function
With the memory auto grouping (MAG) function, only memory channels in the same fre-
quency band (Band) can be called.
In the memory mode, each time the
only memory channels of the specified frequency band are
automatically recalled as a group, as shown below:
174MHz - 400MHz
480 MHz - 999.995MHz
memory channel
When " " is selected, the MAG function is turned OFF and all memory channels can be
recalled.
Group
All memory channels.
AIR band (108 - 137MHz) memory channels only.
144MHz band (137 - 174MHz) memory channels only.
430MHz band (400 - 480MHz) memory channels only.
174MHz to 400MHz and 480MHz to 999.995MHz Memory channels.
All memory channels
Selectable Memory Channels
key is pressed,
108MHz - 137MHz
memory channel
400MHz-480MHz
memory channel
S-DX DISP
DIGITAL / ANALOG TRANSCEIVER FTM - 500D
（AIR Band）
137MHz-174MHz
memory channel
47