Recall Memory (There Are Three Ways) - Yaesu FTM-200DR Operating Manual

3. Press and hold the [V/M
Alternatively, press the DIAL knob to highlight [WRITE] and
a pop-up will be displayed. Press the DIAL knob again.
If you attempt to register a frequency to a memory channel
that already contains frequency data, "OVER WRITE?"
will appear on the screen. Rotate the DIAL knob to select
[OK], then press the DIAL knob to overwrite the memory
channel.
4. The memory is stored.
The written memory channel is recalled.

Recall memory (There are three ways)

(1) Press [V/M] key to recall
1. Press the [V/M
MW
The last used memory channel is recalled.
2. Rotate the DIAL knob to select the memory channel to
recall.
• Press and then rotate the DIAL knob to select in
10-channel steps.
• Press the [V/M
(2) Recall from the Function List
1. Press the [F
MENU
2. Press the DIAL knob.
Or press and hold the [F
3. Rotate the DIAL knob to select [MEMORY CH LIST] then
press the DIAL knob.
The memory channel list appears.
The memory channel list can also be displayed by the
following operations.
1. Press and hold [F
2. Press the DIAL knob.
3. Rotate the DIAL knob to select [MEMORY CH] then press
the DIAL knob to display the memory channel list.
• Press the [UP] or [DWN] key on the microphone to
select in 10 channel steps.
• Press the number keys on the microphone to quickly select
a memory channel as shown in the example below:
Press the [1] key: Memory channel 100
Press the [A] key: PMS Memory channel L01
4. Rotate the DIAL knob, select the memory channel to
recall, then press the DIAL knob.
5. A pop-up with [RECALL] highlighted appears. Press the
DIAL knob.
The selected memory channel will be recalled.
38
] key.
MW
] key.
] key again to return to VFO mode.
MW
] key.
] key  [1 FRERUENCY INPUT]
MENU
]  [18 MEMORY LIST]
MENU
MEMORY CH LIST
001 145.000
002
. ｰ ｰ ｰ ｰ
003
. ｰ ｰ ｰ ｰ
004
. ｰ ｰ ｰ ｰ
Press
KEYPAD HOME
SCAN TXPWR
SQL OFF ARS
RPT-R TONE
DTMF APRS
MEMORY CH LIST
001 145.000
002
433.300
003
. ｰ ｰ ｰ ｰ
004
. ｰ ｰ ｰ ｰ
HIGH
AUTO
100.0
OFF