Changing The Operation Band; Transmitting; Locking The Keys And Dial Knob - Yaesu FTM-200DR Operating Manual

C4fm/fm 144/430mhz dual band transceiver
Hide thumbs Also See for FTM-200DR:
Table of Contents

Advertisement

Changing the operation band

Two operational bands are displayed on the top and bottom. The upper display band can
be changed by operating the frequency and radio wave format.
1. Each time the [A/B] key is pressed, the operating band
switches between "A band" and "B band".
The upper display is called the "operating band", and the
lower display is called the "sub band".
The operating band signals and sub-band signals cannot be
received simultaneously.

Transmitting

1. While pressing and holding PTT, speak into the microphone.
2. Release the PTT to return to receive. The receive mode is indicated by the color of the
Status Indicator light on the display.
DIGITAL
TX
RX
Red
Green
Blue
Blue
In Digital Mode, if a received signal contains a DG-ID different from the DG-ID setting of this
transceiver, the upper green and lower blue lights flash. In FM mode, the upper and lower green
lights flash when receiving a signal containing a tone or DCS different from the squelch setting of
this station.
• If the PTT switch is pressed when a frequency other than the amateur ham radio band is
selected, an alarm tone (beep) will be emitted, "TX PROHIBIT" appears on the display, and
transmit is disabled.
• If transmission is continued for a long period, the transceiver overheats, and the high temperature
protection function is activated. As a result, the transmitting power level is automatically set to
Low Power. If transmission continues while the high temperature protection function is active,
the transceiver will be forcibly returned to the receive mode.

Locking the Keys and DIAL knob

1. Press the [POWER (Lock)] switch, "LOCK" is shown on
the display for one second, the "
display, and then the keys and DIAL knob are locked.
Press the [POWER (Lock)] switch again, "UNLOCK" will
be shown on the Display and the keys and the DIAL
knob are unlocked.
The "
" icon disappears.
The PTT switch and the VOL knob cannot be locked.
ANALOG
TX
RX
Red
Green
Red
Green
" icon appears on the
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftm-200de

Table of Contents