Ship's Speed Display - Furuno CI-68 Operator's Manual

2.2 Ship's Speed Display

Item
Ship's speed* (In
GT, WT) or
Water tracking
speed
(In Nav mode)
Fore-aft speed*
Port-starboard
speed*
Drift angle*
Trip
Synthesized Speed Vector (Green)
Ship's speed display
Description of ship's speed display indications
Port-starboard and fore-aft speeds are synchronized when SCALE SYNC in
the DISP2 menu is set to ON. The available speed setting range is 0.0 to 30.0
(kt).
*: Speed measured depends on setting of SHIP SPD MODE in the DISP1
menu.
Speed in the fore-aft direction. The speed setting range is 0.0 to 40.0 (kt).
Fore speed is denoted with a yellow "▲" above the speed readout and aft
speed with a yellow "▼" below the speed readout.
Speed in the port-starboard direction. The speed setting range is 0.0 to 40.0
(kt). Port speed is denoted with a red "◄" to the left of the speed readout and
starboard speed with a green "►" to the right of the speed readout.
The angle measured in degrees between ship's heading and the actual
movement. When drift angle is to port, a red "◄" appears and when it is to
starboard a green "►" appears. In the NAV mode, drift in water tracking speed
is shown.
Shows trip distance. The distance is referenced to fore or fore/aft depending
on the setting of LOG PULSE OUT in the I/O menu.
2. INTERPRETING THE DISPLAYS
Description
2-5