Adjusting Lcd Brilliance - Furuno CI-68 Operator's Manual

1.3 Adjusting LCD Brilliance

You can adjust the brilliance of the FURUNO-supplied monitor as below. To adjust the
brilliance of a commercial monitor, see its owner's manual.
1. Press the [BRILL] key to open the brilliance adjustment window.
Note: Execute the next step within five seconds after displaying the brilliance
adjustment window. Otherwise the window is erased.
2. Press ► or ▲ to raise the brilliance; ◄ or ▼ to lower it. The brilliance may also be
adjusted by pressing the [BRILL] key. In this case, brilliance is adjusted cyclically:
0→1→...7→6...0→.
Note: You can adjust the backlighting for the control panel with PANEL DIMMER on the
MENU 1 menu.
L
C C C C C C ?
L
Brilliance adjustment window
1. OPERATIONAL OVERVIEW
H
H
1-3