Choosing The Range - Furuno CI-68 Operator's Manual

1. OPERATIONAL OVERVIEW

1.7 Choosing the Range

You may choose the speed range as follows:
1. Press the [RANGE] key to show the range setting window.
Range setting window (example: range setting window for tide vector display)
2. Within five seconds after completing step 1, operate the Setting Knob or the CursorPad
to set the range.
Setting Knob: Rotate clockwise to raise the range; counterclockwise to lower the range.
CursorPad: Press ► or ▲ to raise the range; ► or ▼ to lower the range.
Display
Tide vector
Ship's speed
Graph
Course plot
Echo level
1-10
Display and range to set
Tide speed range setting window appears. Set tide/tide differential range
(radius of vector display ring) appropriately.
The ship's speed range setting window shown depends on whether SCALE
SYNC in the DISP2 sub menu is set to ON or OFF.
ON: Port-starboard and fore-aft speeds are synchronized. The ship's speed
range setting window appears. Set speed appropriately.
OFF: The ship's speed range setting window appears. Set fore-aft speed
appropriately.
The speed range setting window shown depends on the setting of MODE in
the DISP1 sub menu.
TIDE or TIDE DIF: The tide speed range setting window appears. Set tide
speed range (port-starboard of tide speed/tide differential graph)
appropriately.
SPEED: The ship's speed range setting window appears. Set ship's speed
range (fore-aft of ship's speed graph) appropriately.
The display scale setting window appears. Set display scale as appropriate.
Tide speed range setting window appears. Set tide and tide differential range
(radius of vector display ring) appropriately.
Range