Menu Tree - Furuno CH-300 Operator's Manual

MENU TREE

[MENU] key
COM1 menu
COM2 menu
HORZ menu
VERT menu
ES menu
(When SHORT-CUT KEY is selected at SYSTEM SETTING 1 menu.)
SHORT-CUT menu
PRESET menu
(Default setting)
(CONTINUED ON NEXT PAGE)
TX POWER ( MAX , MIN)
PULSELENGTH ( LONG , SHORT)
TX RATE (EXTERNAL, 1-10; 10 )
INT REJECT ( OFF , ON)
AGC ( OFF , ON)
AUDIO LEVEL ( 0 -10)
DELETING TRACK ( NO , YES)
MIX MODE ( STANDARD , EMPHASIS)
WHITE MARKER (8-color: OFF , 1-7; 16-color: OFF , 1-15)
SIG LEVEL (8-color: OFF , 1-6; 16-color: OFF , 1-14)
COLOR ( 16 , 8)
BKGD COLOR (1, 2 , 3)
TVG LEVEL (0-10, 4.0 )
TVG DISTANCE (0-10, 4.0 )
RES. COLOR ( LOG , LINEAR, SQUARE, CUBE)
CLUTTER ( 0 , 1, 2, 3)
TARGET KEY (POSITION , ECHO )
LOCK MODE ( AUTO , MANUAL)
AUTO TILT ( OFF , ±2°, ±4°, ±6°, ±10°)
TVG LEVEL (0-10, 4.0 )
TVG DISTANCE (0-10, 4.0 )
RES. COLOR ( LOG , LINEAR, SQUARE, CUBE)
CLUTTER ( 0 , 1, 2, 3)
HORZ SCAN RATE ( 1 , 2, 3, 4)
VERT SCAN RATE ( 1 , 2, 3, 4)
HORZ RANGE ( x1 , x2)
TVG LEVEL (0-10, 4.0 )
TVG DISTANCE (0-10, 4.0 )
RES. COLOR ( LOG , LINEAR, SQUARE, CUBE)
CLUTTER ( 0 , 1, 2, 3)
A-SCOPE ( OFF , ON)
KEY1 ( VER SEARCH , VOLUME, DEL TRACK, AUTO TILT, BKGD
SIG LEVEL, CLUTTER, RES. COLOR, WHITE MARKER)
KEY2 (Same choices as KEY1. Default setting: VOLUME)
KEY3 (Same choices as KEY1. Default setting: DEL TRACK)
CUSTOM1 (MODE: HORIZONTAL EXPANSION , FREQ: HI , SECTOR: 240 °,
TRAIN: 0 °, RANGE (m): 200 , TILT: 30 °)
CUSTOM2 (MODE: HORIZONTAL , FREQ: HIGH , SECTOR: 360 ° ,
TRAIN: 0 °, RANGE (m): 200 , TILT: 30 °)
CUSTOM3 (MODE: VERTICAL , FREQ: HIGH , SECTOR: 180 °,
TRAIN: 90 °, RANGE (m): 200 , TILT: 90 °)
DEFAULT SETTINGS
SHOWN IN BOLD ITALIC.
AP-1