System Setting Menus - Furuno CH-300 Operator's Manual

5. MENU OPERATION
5.4.2

System setting menus

SYSTEM SETTING 1 menu
1. Display the SYSTEM menu and press ▲ or ▼ to choose SYSTEM SETTING.
2. Press ►.
3. Press ▲ to MENU.
4. Press ◄ to choose "1."
MENU
POSITION
TRACK
CURRENT DATA
HEADING INDICATION : TRUE
NORTH MARK
CSE DATA
NAV DATA
NAV2 BAUDRATE
TVG CORRECTION
UNIT
TEMP
TARGET L/L
CUSTOM KEY
ETA MARK
: SELECT
System setting 1 menu
SYSTEM SETTING 1 menu description
POSITION: Chooses how to displays ship's position; latitude and longitude, Decca/Loran C
LOP or Cursor L/L. (The connected navigator must be capable of displaying L/L or LOP.)
The default setting is latitude and longitude. Position data required.
TRACK: Turns the track display on or off on the horizontal display. The track is always
shown on the video plotter display regardless of this setting.
CURRENT DATA: Turns current data (tide), shown by vector, on or off. FLOW FROM
shows from what direction the current is flowing; FLOW TO shows the direction the current
is heading. The default setting is OFF. Requires a current indicator.
5-10
** SYSTEM SETTING 1 **
1 2
: SHIP'S L/L SHIP'S LOP
: OFF ON
: OFF FLOW FROM
AZ
: OFF ON
: NAV GYRO
: GPS LoranC LoranA DR DECCA OTHERS
: 4800 9600 19200
: OFF 1/2 1/1
: m ft fa
: C F
: OFF ON
: PRESET KEY SHORT-CUT KEY
: OFF 10sec 30sec
: CHANGE MENU: END
Current Vector
FLOW FROM
Current vector
CURSOR L/L
FLOW TO
38400
HIRO P/B
1min 3min 6min
FLOW TO