Short-Cut Key - Furuno CH-300 Operator's Manual

5.3.3

Short-cut key

The default settings are key [1], interference rejector; key [2], signal level, and key [3],
background color. The operator may change their functions as desired.
Note: In the combination modes the short-cut key operation is only possible from the main
window.
1. Choose SHORT-CUT following the procedure in paragraph 5.2.1.
2. Press the MENU key to open the menu.
3. Press ▲ to choose MENU, and then press ◄ or ► to choose SHORT-CUT.
MENU
KEY 1
KEY 2
KEY 3
SELECT FUNCTION TO BE ALLOCATED TO EACH CUSTOM KEY.
CUSTOM KEY MAY BE USED AS A PRESET KEY.
: SELECT
4. Press ▲ or ▼ to choose key to preset. For example choose KEY 1.
5. Press ◄ or ► to choose item.
6. Press the MENU key to finish.
Activating a short-cut key
1. Press a CUSTOM MODE key, and the dialog box programmed for the custom key
pressed appears. For example, the dialog box below is for CLUTTER (HORZ).
CLUTTER (HORZ):
2. Press ◄ or ► to choose option desired.
3. Press the MENU key to close the dialog box.
COM1 COM2 HORZ VERT
VER SEARCH VOLUME
SIG LEVEL CLUTTER RES. COLOR WHITE MARKER
VER SEARCH VOLUME
SIG LEVEL CLUTTER RES. COLOR WHITE MARKER
VER SEARCH VOLUME
SIG LEVEL CLUTTER RES. COLOR WHITE MARKER
: CHANGE MENU: END
SHORT-CUT menu
0 1 2 3
5. MENU OPERATION
ES SHORT-CUT
DEL TRACK AUTO TILT BKGD
DEL TRACK AUTO TILT BKGD
DEL TRACK AUTO TILT BKGD
SYS
5-7