Choosing A Range - Furuno CH-300 Operator's Manual

3.3

Choosing a Range

The RANGE control chooses the detection (display) range, in 15 settings. Choose the
range according to either the fish species being searched or the depth desired. Each time
the control is operated the newly chosen range briefly appears in large characters at the
screen top. Range is permanently displayed at the top right-hand corner of the screen.
Normally the range is set so that the bottom is traced at the lower part of the screen (like an
echo sounder).
Unit 1 2
Meters 10 20
Feet 30 60
Note 1: Unit of range measurement may be chosen from among meters, feet, fathoms,
passi/braza or Hiro (Japanese) with UNIT on the SYSTEM SETTING 1 menu. For details
see page 5-11.
Note 2: Ranges may be freely preset as desired. For details see page 5-15.
Range concept
Default vertical scan mode range settings
3 4 5 6
30 40 60 80
90 120 150 200 250 300 400 500 600 800 1000 1500 2000
Surface
RANGE m
Bottom
7 8 9 10
100 120 160 200 250 300
3. VERTICAL SCAN MODE
11 12 13
400 500
14 15
600
3-3