Inscribing The Event Marker; Deleting All Event Markers From Echo Sounder Display - Furuno CH-300 Operator's Manual

4. ECHO SOUNDER MODE
4.8.1

Inscribing the event marker

1. Operate the Omnipad to place the cursor on the location desired for an event marker.
2. Press the EVENT key to inscribe the event marker.
"Previous event marker"
Depth, Water Temp. Display
"Latest event marker"
4.8.2

Deleting all event markers from echo sounder display

Event markers inscribed on the echo sounder display may be erased collectively as follows:
1. Operate the Omnipad to place the cursor outside the display area.
2. Press the EVENT key to show the following dialog box. Do the next step within four
seconds, otherwise the dialog box will be erased.
DELETE EVENT MARK?
NO YES
3. Press ► to choose YES and press the MENU key.
4-6
Display area
NAV
DATA
or
A-SCOPE
DISPLAY
How to inscribe, delete the event markers
To delete all event markers
on the echo sounder dislay,
place the cursor outside
the display area and
press the EVENT key.