Top Panel
Mixer Section
11
CH STATUS/CH SEL
12
CH STATUS/CH SEL
11
12
11. [CH STATUS/CH SEL] Key: channels 1-16
* ON/OFF key for each channel during normal display
(explained later).
* Select the channel to CHECK/CHANGE the setting with
([CH PARAM EDIT] Key (No. 17-22) when CHECKING/
CHANGING various PAN, equalizer and other mixer
parameters.
* Select the recorder track (1-16) for REC READY or REC
CANCEL (SAFE) status (flashing [REC ASSIGN-DIRECT]
key or [REC ASSIGN-BUSS] key]) when selecting the
track to record.
* Pressing the [CH STATUS/CH SEL] key alone switches
between on and off (mute) of the corresponding fader.
* Pressing this key while holding down the [SHIFT] key
switches between on and off the solo function.
* The flashing key illustrates the following STATUS:
[ORANGE]:
The level of the input signals [INPUT] into input
A to H are adjustable. Only channels 9-16 are
adjustable with the fader.
[GREEN]:
The level of the audio [TRACK (PLAY)] on the
track are adjustable with the fader. It will
continue to flash when the SOLO function is ON.
[OFF]:
The signals to the fader are [MUTE] (no sound).
ORANGE
CH STATUS
+6
0
-10
-20
-30
-40
-50
-60
-
2
3
1
CH STATUS
ORANGE
+6
0
-10
-20
-30
-40
-50
-60
-
9
10
11
A
B
C
INPUT
RED
REC
GREEN
PLAY
+6
0
-10
-20
-30
-40
-50
-60
-
4
5
6
7
RED
REC
GREEN
PLAY
INPUT
+6
0
-10
-20
-30
-40
-50
-60
-
12
13
14
15
D
E
G
F
[RED]:
12. Channel Fader: channels 1-16
* The 1-8 channel faders are used to adjust the audio
level [TRACK] of tracks 1-8.
* The 9-16 channel faders are used to adjust the sound
level of signals input into A to H or audio levels
[TRACK] of 9-16. Use the [INPUT SEL] key to choose
which level to adjust.
13. [SCENE-RECALL/DIRECT RCL] Key
* This is used to recall the scene memory.
* Press this key while the [SHIFT] key is depressed for
direct scene memory recall.
* Simultaneously press this key and the [SCENE-STORE/
MAP] key to erase the scene memory.
14. [SCENE-STORE/MAP] Key
* This is used to store scene memory.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the scene map.
* Simultaneously press this key and the [SCENE-
RECALL/DIRECT RCL] key to erase the scene memory.
17
OFF
MUTE
SCENE
RECALL
STORE
CLEAR
DIRECT RCL
MAP
EFF EDIT
EFF1
EFF2
MUTE
MUTE
EQ/COMP
EFF1/EFF2
HI-G/F/Q
PRE/POST
COMP
AUX1/AUX2
MID-G/F/Q
PRE/POST
PAN
LO-G
FADER
CH VIEW
CH PARAM EDIT
8
TRACK
OFF
MUTE
+6
0
-10
-20
-30
-40
-50
-60
-
16
TRACK
MASTER
H
INPUT
The corresponding tracks (1-16) are READY
(to record). The [GREEN] and [RED] key will
alternately flash. The light will remain ON
during the recording process.
13
14
15
16
17
18
19
20
21
22
23
24