Setup Of The Event Start Mode By Ref Tc [Ref Ply 405 -***]; Setup Of Time Code To Be Recorded [Rec Fr Am 411 -***] - Fostex 8335 Owner's Manual

6. Setup of the event start mode by REF TC [rE FP LY 405 -***]
When the D-15 is in the STOP or PAUSE mode, whether D-15 should event
start (in PLAY mode) automatically or not when the time of the external time
code (REFERENCE TC) that is input and the time setup in the D-15 memory
[00] coincide, is selected from this menu.
The event start mode can be selected from 3 different types - "oncE," "EVEry"
and "oFF." If the D-15 GPI ON/OFF switch is "ON," "EVENT 0" is simultaneously
output from the GPI OUT connector.
After entering the SETUP mode, rotate the [JOG] dial, select the [rEFPLY 405
-***] menu, and press the [EXECUTE/SET] key. Then, after rotating the [JOG]
dial CW and CCW to select the desired frame rate, press the [EXECUTE/SET]
key again (* is the initial setting).
This setup content will return to the initial setting when power is switched
OFF or after completion of the "oncE" mode.
Functional note Menu No.
oFF 405
oncE 405
EVEry 405
If the event start mode is set to "oncE" or "EVEry," [REF] in the REF TC
display will blink to indicate that it is in the event start mode.
7. Setup of time code to be recorded [rE C Fr AM 411 -***]
When either 9.97fps or 30fps external time code is to be input and recorded
or when executing time code CHASE, this menu selects the frame rate which
matches the external time code that is input. Either 29.97fps or 30fps is
selected for the frame rate. However, should 24fps or 25fps time codes be
input, the D-15 will automatically acknowledge this.
After entering the SETUP mode, rotate the [JOG] dial, select the [rECFrAM 411
-***] menu, and press the [EXECUTE/SET] key. Then, after rotating the [JOG]
dial CW and CCW to select the desired frame rate, press the [EXECUTE/SET]
key again (* is the initial setting).
This setup content will be held even if the power is switched OFF.
Functional note Menu No.
Fr 29.97 411
Fr 30 411
Model 8335 (TC/SYNC card) Owner's Manual
Setup No. Functional content
000 (*) It will not event start by ignoring the REF
TC time.
001 Functions only under the positive direction
one time speed time code and will execute
event start once.
002 Functions only under the positive direction
one time speed time code and will
repeatedly execute event start.
Setup No. Functional content
000 (*) The 29.97fps time code is selected.
001 The 30fps time code is selected.
13