Table of Contents
Advertisement
Remote Control, cont'd
®
Windows
-Based Control Program
The Windows
communicates with the switcher via the rear panel Remote RS-232 port, provides
an easy way to set up ties and sets of ties. The program is compatible with
Windows 2000 and Windows XP and above, and provides remote control of the
following:
•
•
Updates to this program can be downloaded from the Extron Web site
(http://www.extron.com).
Installing the software
The program is contained on the Extron Software Products CD-ROM. Install the
software as follows:
1.
Figure 4-2 — Software CD window
2.
3.
Figure 4-3 — Software installation
4.
4-6
SW RGBHV Series Switchers • Remote Control
®
-based Extron Universal Switcher Control Program, which
Input selection (including audio breakaway for models with video and audio)
Audio gain and attenuation adjustments (audio models)
Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 4-2).
Click the Software tab (figure 4-2).
Scroll to the Universal Switcher Control program and click Install (figure 4-3).
Follow the on-screen instructions. By default, the Windows installation of the
Matrix Switchers Control Program creates a C:\UNIVSW folder and places
two icons (Universal Switcher Control Program and Universal Switcher Help)
into a group named "Extron Electronics".
Advertisement
Table of Contents
