Windows ® -Based Program Control; Installing The Software - Extron electronics MMX 42 Series User Manual

Windows -Based Program Control
®
The Windows-based Extron Universal Switcher Control
Program, which communicates with the switcher via the
RS-232 port, provides an easy way to configure and operate the
MMX Series matrix switchers. The program is compatible with
Windows 2000 and Windows XP.

Installing the software

The program is contained on the Extron Software Products
DVD. Install the software as follows:
1.
Figure 4-2 — Software DVD window
N
2.
3.
Figure 4-3 — Software installation
MMX 42/62 Series Matrix Switchers • Remote Control
Insert the DVD into the drive. The Extron software DVD
window (figure 4-2) should appear automatically.
If the window does not self-start, run Launch.exe from the
DVD.
Click the Software tab (figure 4-2).
Scroll to the desired program and click Install (figure 4-3).
4-7