Step Three: Add A Device And Set Up Its Connection; For Ip Models - Extron electronics MediaLink MLC 104 Plus Series Setup Manual

Software Setup, cont'd

Step three: add a device and set up its connection

For IP models

For IP models, obtain the following information from your
network administrator:
• IP address / hostname
• gateway IP
• subnet
• Telnet port
• web port
• passwords
1.
2.
3.
4.
5.
MLC 104 Plus Series • Software Setup
3-6
Select MLC 104 IP Plus Series from the IP Link Device
drop-down list.
Enter an IP Address in the Name/IP Address field (or
leave the default address).
Enter a unique Display Name.
Click Make this device a GlobalViewer Host (if desired).
Click the Advanced button. This opens additional Add
Device screen options and changes the Advanced button
to read Basic. If you wish to return to the basic screen
options, click the Basic button.