3.2.3 Erasing user channel individually
To erase a user channel;
1. Press [SETUP] in RT display.
2. Select "USER CH" in RT SETUP menu and then press [ENT].
3. Select "ENTRY" in "ENTRY/ERASE" pop-up display and then press [ENT].
Press [ENT] to show "MODE, CH, FRQ" pop-up display.
4.
Select the MODE and channel to be erased.
5.
Set the transmission and receiving frequencies to 0.0 kHz.
6.
[ENT]
3-13
3.2 RT SETUP