Furuno FS-1570 Service Manual page 13

3. Self test
No. Test
3.1 DSC self test
RT self test
3.2
Terminal unit self
3.3
test
Antenna coupler
self test
3.4
Printer self test
3.5
4. Check of program version
Use the system with the latest program.
No.
Press [3 TEST] with DSC display for DSC self test.
4.1
To check the detail program version, press [1 RT] five times while holding
down [File] with the test result display.
Press [F6] and select "self test" for terminal unit self test.
4.2 To check the detail program version, press [F1] while holding down [Alt]
and [Fn] with the test result display.
4.3 U1 in antenna coupler unit
Procedure
Press [3 TEST] with DSC display.
Press [3 TEST] with RT display. Items to be
checked differ between
FS-2570.
[F6], select "self test"
Set S2#2 to ON and press [S3:TUNE] on the
COUP board.
The self test is not executed when
[S1:MANUAL/AUTO] is set to MANUAL.
To print out the self test result, turn on the
system while holding down [LF].
To print out the DIP switch setting, turn on the
system while holding down [NLQ].
How to read program number
v
Result
FS-1570 and
Check List
Refer to
Page 6-1
Page 6-5
Page 6-11
Page 6-10
Refer to
Page 6-1
Page 6-2
Page 6-11
Page 2-22