4.4.2 DSC MODEM and NBDP MODEM
To update DSC MODEM and NBDP MODEM program;
1. Turn off the system. FS-1570T/FS-2570T.
2. Connect the PC. See 4.2 Connection.
3. Confirm that DIP switch S3-#3 and #4 on T-CPU board is on.
4. Insert the floppy disk which contains the latest program into the drive A.
5. Double click the batch file icon of the program to be updated.
When updating by using DOS window, enter the batch file name to be
updated.
Program to be updated
DSC MODEM
NBDP MODEM
6. Updating program runs automatically.
7. When the message [TRGET POWER ON] appears, turn on the system.
You can see the message "LOAD CONFIG DATA FROM TRX UNIT" on
FS-2750C.
Command
UPDSC.BAT
UPNBDP.BAT
4-7
4.4 Updating Program