Furuno FS-1570 Service Manual page 10

2. Check of settings
No.
2.1 JP-3 on W/R board (power to the antenna unit, Default: OFF)
DIP switch setting on T-CPU board for the connection of GNSS,
2.2
incoming indicator and distress alert button.
2.3 Check registered MMSI in DSC Setup display.
Model, FS-1570 or FS-2570 is selected through the menu. Power
2.4
data and contents of RT self test differ between two models.
The RT is set through Setup menu.
2.5
TX FREQ is set in accordance with local regulation.
"SYSTEM" setting of DSC Setup menu is made.
2.6
WATCH RCVR is set to HF for the ship navigating in the sea area
A3.
NBDP terminal is setup through the menu, and AAB and ID are
2.7
registered. "Slave Delay" of System ([F6]) menu is set to 8 msec.
MMSI and model registration
1. Press NMI SW (S1) on T-CPU board and enter the password.
2. Select "ALL Clear" and the press [ENT].
JP-3 setting on W/R-1 and 2 boards
Jumper
1-2
JP-3
2-3
Item to be checked
Remarks
12 V to FAX-5
No power to antenna (Factory setting)
ii
Check List
Result Refer to
Page 3-34
Page 3-29
Page 3-1
Page 3-27
Page 3-2
Page 3-4
Page 3-8
Page 3-14
Page 3-25
Page 3-37