Global Configurator - Extron electronics Extron IPL T S4 Setup Manual

Introduction, cont'd

Global Configurator

Global Configurator (GC) is a software application that gives
users the ability to create a single configuration file of all the
controlled devices on their audio/video (A/V) network.
There are two types of devices in an A/V system:
• Controllers - Control devices that have an IP Link
• Controlled devices - Audio/video products, such as
Once a "global" configuration file is built, GC then generates a
graphical user interface called GlobalViewer
to monitor and control all of the A/V devices contained within
the GC configuration file.
When the configuration file is created, one or more of the IP Link
controllers on the network can be designated as a GlobalViewer
host device.
The completed configuration file is uploaded to the host
device(s). The GlobalViewer interface can then be launched by
opening an Internet browser on a local PC and entering the host
device's IP address in the browser's Address field.
Global Configurator application screen
IPL T S Series Interfaces • Introduction
1-4
Ethernet port for network connectivity, and serial, relay, I/O,
and infrared (IR) ports for A/V device connectivity
video projectors, displays, VCRs, DVD players, document
cameras, projector screens, room lighting systems, etc;
all of the equipment that is used to generate an audio/video
presentation
enabled
®
that allows users
®