Step Thirteen: Change Device Settings (If Desired) - Extron electronics Extron IPL T S4 Setup Manual

Step thirteen: change device settings (if desired)

If for any reason you need to change any of the previously
configured settings:
1. Click Tools > Change Device Settings.
2. Select a device.
3. Click Settings to open the Settings drop-down listing.
4. Select and change the desired setting(s), for example:
Set Mail Server..., Set Gateway..., Set Subnet Mask..., etc.
N Use Set Mail Server... in the drop-down listing to
identify the local mail server's IP address, domain, and
passwords.
IPL T S Series Interfaces • Software Setup 3-21