Step Ten: Set Monitored Conditions - Extron electronics Extron IPL T S4 Setup Manual

Step ten: set monitored conditions

The Monitor tab is used to respond with an action or e-mail to
a specified condition or event. Actions vary by selected device,
and include options such as Enable/Disable PINs, Lockout
Front Panel, Time Delay, etc. Custom e-mails can be created and
sent to specified e-mail addresses following specified conditions
or events.
To add a monitored condition:
1. Click the Monitor tab.
2. Click the Add Monitor button.
The Monitored Condition Wizard opens (see below).
IPL T S Series Interfaces • Software Setup 3-17