Serial Device Connection - Extron electronics Extron IPL T S4 Setup Manual

Pinouts for the two types of Ethernet cables are shown below:
Side View
RJ-45 Connector
N

Serial Device Connection

There are two types of serial connections:
• 9-pin D connectors
• Captive screw connectors
Pins:
1 2 3 4 5 6 7 8
Insert
Twisted
Pair Wires
The diagram is representative of both the patch
(straight-through) and the crossover cable. Both types of
cables have twisted pairs of conductors inside the sheath.
IPL T S Series Interfaces • Hardware Setup
Straight-through Cable
(for connection to a switch, hub, or router)
End 1
Pin Wire Color
1 white-orange
2 orange
3 white-green
4 blue
5 white-blue
6 green
7 white-brown
8 brown
Crossover Cable
(for direct connection to a PC)
End 1
Pin Wire Color
1 white-orange
2 orange
3 white-green
4 blue
5 white-blue
6 green
7 white-brown
8 brown
End 2
Pin Wire Color
1 white-orange
2 orange
3 white-green
4 blue
5 white-blue
6 green
7 white-brown
8 brown
End 2
Pin Wire Color
1 white-green
2 green
3 white-orange
4 blue
5 white-blue
6 orange
7 white-brown
8 brown
2-5