Step Three: Add A Device - Extron electronics Extron IPL T S4 Setup Manual

Software Setup, cont'd

Step three: add a device

There are four ways to launch the Add Device dialog box:
• Press Ctrl+A on the keyboard
• Click Edit > Add Device...
• Click the Add Device icon
• When you select Create a Project in the Start Options dialog
With the Add Device dialog box open:
1.
2.
3.
4.
5.
IPL T S Series Interfaces • Software Setup
3-6
box, and follow the prompts, the Add Device dialog is the
second dialog box to open.
Select an IP Link
Enter an IP address in the Name/IP Address field (or leave
the default address).
Enter a unique display name.
Click Make this device a GlobalViewer Host (if desired).
Click the Advanced button. This opens additional Add
Device screen options, and changes the Advanced button
to read "Basic." (If you wish to return to the basic screen
options, simply click the Basic button.)
device from the drop-down list.
®