Subaru Forester Eyesight 2022 Owner's Manual page 161

■ How to customize
Operations can be performed when the select
lever is in the "P" position and the ignition
switch is in the ON position while the vehicle
is parked. However, the Cruise Control Accel-
eration Characteristics and warning volume
can be changed, even while you are driving.
1. Pull the /
display the change settings screen.
Pull and hold the
change to the settings screen.
2. Pull the /
"EyeSight" or "Warning Volume", and pull
the (Info)/SET switch to confirm.
The system will then switch to the settings
screen.
Operate the following switches according to
the display on the screen.
• Select:
(Return) switch/
(Send) switch
• Confirm:
(Info)/SET switch
When "Go Back" is selected, the system will return to the screen 1 level above
the current one.
●
Warning Volume
The volume can be set to Max/Mid/Min.
When on the Warning Volume settings screen, if the volume is selected with the
switch, 3 short beeps will sound.
●
Lead Vehicle Acquisition Sound
The Lead Vehicle Acquisition Sound setting can be activated (On) or deactivated (Off).
●
Lead Vehicle Moving Monitor Function
The Lead Vehicle Start Alert function setting can be activated (On) or deactivated (Off).
switch toward you to
(Info)/SET switch to
switch toward you, select
NOTE
Change settings screen
A
Customizing functions
Settings screen
Screen Setting
Select Select
Enter Enter
Select Select
S03723
/
161