Subaru Forester Eyesight 2022 Owner's Manual page 114

Lane Departure Prevention Function
CAUTION
• The performance of Lane Departure Prevention Function may not be optimal
under the following conditions. In addition, Lane Departure Prevention Func-
tion may not operate or the operation may be canceled.
- Immediately after the weight of your vehicle changes radically
- Immediately after the replacement of a tire or the adjustment of tire pressure
- Immediately after the adjustment, repair or replacement of the camera or
related components
- Immediately after the repair or replacement of the suspension or steering
system
- A winter tire or a tire other than a genuine SUBARU tire is used.
- The vehicle is in a crosswind.
- The road grade abruptly changes (uphill or downhill).
- The grade of the crossing direction in a road is large or changes abruptly.
- Unevenness, winding and joint of a road surface
- The acceleration/deceleration is high.
- Immediately after starting the engine when the outside temperature is low.
- The outside temperature is high.
• When you do not use Lane Departure Prevention Function, make sure to turn
off the
may operate unexpectedly, causing an accident.
• If you turn on the
electric power steering may change.
• If Adaptive Cruise Control is activated after Lane Departure Prevention Func-
tion was turned on, Lane Departure Prevention Function switches to Lane
Centering Function (only when Lane Centering Function is set to on in the
customizing functions).
• When Lane Centering Function is turned off by the customizing functions (
page 160), push the
ture Prevention Function. In this scenario, the Adaptive Cruise Control setting
does not affect Lane Departure Prevention Function.
114
(Lane Keep Assist) switch. If the function is left on, the function
(Lane Keep Assist) switch, the operation power of
NOTE
(Lane Keep Assist) switch to activate Lane Depar-
