Source Of Second Master Frequency Command; Source Of First Operation Command - Delta Electronics AC Motor Drive VFD-EL User Manual

Group 2: Operation Method Parameters
02.00 Source of First Master Frequency Command
02.09

Source of Second Master Frequency Command

Settings
These parameters set the Master Frequency Command Source of the AC motor drive.
The factory setting for master frequency command is 1. (digital keypad is optional.)
Setting 2: use the ACI/AVI switch on the AC motor drive to select ACI or AVI.
When the AC motor drive is controlled by external terminal, please refer to Pr.02.05 for details.
The first /second frequency/operation command is enabled/disabled by Multi Function Input
Terminals. Please refer to Pr.04.05 ~ 04.08.
02.01

Source of First Operation Command

Settings
The factory setting for source of first operation command is 1. (digital keypad is optional.)
When the AC motor drive is controlled by external terminal, please refer to Pr.02.05/Pr.04.04
for details.
Revision August 2008, 2ELE, V1.02
0 Digital keypad UP/DOWN keys or Multi-function Inputs UP/DOWN.
Last used frequency saved. (Digital keypad is optional)
1 0 to +10V from AVI
2 4 to 20mA from ACI
3 RS-485 (RJ-45) communication
4 Digital keypad potentiometer
0 Digital keypad (Digital keypad is optional)
1 External terminals. Keypad STOP/RESET enabled.
2 External terminals. Keypad STOP/RESET disabled.
3 RS-485 (RJ-45)/USB communication. Keypad STOP/RESET
enabled.
4 RS-485 (RJ-45)/USB communication. Keypad STOP/RESET
disabled.
Chapter 4 Parameters|
Factory Setting: 1
Factory Setting: 0
Factory Setting: 1
4-37