Advertisement
05. Handling methods and precautions
1.1 This product has top and bottom
double sided contacts.
Pay attention to the face of
copper foil, and insert the FPC
to the full depth of the connector.
* Before FPC insertion, do not touch
the lever (Do not apply external force)
* Insert an FPC in the direction
parallel to the board
* This connector is of the back lock type,
which has the FPC insertion section on
the opposite side of the lever.
Be careful not to make a mistake in the
FPC insertion position or the lever position.
* Insert an FPC so that
it is vertical to the connector.
* Insert an FPC to the full depth of the
connector without altering the angle.
Panasonic Corporation
industrial.panasonic.com/ac/e/
1.1 Inserting the FPC
Precautions
Guide for Getting FPC connector Y5B and Y5BW
Designed for top contact：Copper foil is top
Designed for bottom contact ： Support plate is top
×
FPC
×Angle to the board
×Incomplete insertion
©
Panasonic Corporation 2015
- 7 -
×
ACCTF15E-3
201507
Advertisement
