Advertisement
07-4. Detailed precautions for solder rework
(1) Flux-applying tool
To prevent solder creeping to a contact section,
we recommend the use of a brush pen that can
apply an appropriate amount of flux.
(e.g., BON-102F, Japan Bonkote)
Conventional tool: Dropper
(2) Selection of soldering iron
For FPC connector with 0.3-mm pitch, we recommend:
- An iron tip with a
Ex. Japan Bonkote
- With a temperature sensor on the iron tip
- Temperature-controllable iron tip
It is also necessary to check that there are no differences between the indicated
temperature and the actual temperature of the iron tip.
The following temperatures are recommended for iron tips:
- Eutectic solder: 300–320˚C
- Lead-free solder of three elements: 340–360˚C
Panasonic Corporation
industrial.panasonic.com/ac/e/
Guide for Getting FPC connector Y5B and Y5BW
retractable-knife shape
- 16 -
Recommended: Brush pen
©
Panasonic Corporation 2015
ACCTF15E-3
201507
Advertisement
