03. Board arrangement and precautions
for using a fold and cut board
(1)Please design and pay attention to the distance from the board edge to the pattern.
When cutting the v-cut board, do not give an excessive stress to the connector,
which risks damaging the connector.
(2)Please design and pay attention to the range of lever movement and the distance
from the housing PCB.
Panasonic Corporation
industrial.panasonic.com/ac/e/
Guide for Getting FPC connector Y5B and Y5BW
©
Panasonic Corporation 2015
- 4 -
ACCTF15E-3
201507