HoMedics BPA-960BT Manual page 27

5. When the measurement is completed, the cuff will deflate
entirely. Once the cuff is fully deflated, a 1 minute countdown
will begin before starting the second measurement
automatically. This process will continue until the end of
the third measurement.
Note:
• If an ERROR code is displayed during measurement, the
monitor will repeat the measurement up to 3 times during the
consecutive measurement process.
• Remain still until all 3 measurements are completed.
6. At the conclusion of the third measurement, the Triple-Check
average will be displayed.
To review your individual results that make the Triple-Check
average, press the + button.
press the
+ button
26