HoMedics BPA-960BT Manual page 21

5. Position cuff edge 0.8 - 1.2 inches
(2-3 cm) above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm. Please make sure the cuff
does not slip during measurement, and the
arrow falls within the proper fit range.
8. Lay your arm on a table (palm upward) so
the cuff is at the same height as your heart.
Make sure the tube is not kinked.
20