Storage Compartment; Adjusting The Shock Absorber Assemblies - Yamaha CRUX REV YD110-1 2016 Owner's Manual

Instrument and control functions

Storage compartment

4
1. Storage compartment
The storage compartment is located
on the left side of the vehicle.
To open the storage compartment
1. Remove panel A. (See page 7-7.)
2. Unhook the hook, and then pull
the storage compartment cover
out.
EAUE3110
1. Hook
2. Storage compartment cover
To close the storage compartment
1. Place the storage compartment
cover in its original position so that
the cover is secured by the hook.
2. Install the panel.
Adjusting the shock absorber
assemblies
Always adjust both shock absorber
assemblies equally, otherwise poor
handling and loss of stability may re-
sult.
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring on each shock ab-
sorber assembly in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring on each shock absorber as-
sembly in direction (b).
4-9
WARNING
EAU14883
EWA10211
ECA10102