Helmet Holding Cable; Storage Compartment - Yamaha MXT9L 2019 Manual

Instrument and control functions

Helmet holding cable

A helmet holding cable is provided to
allow you to secure helmet(s) to the ve-
hicle.
4
1
4
1. Helmet holding cable
2. Passenger seat
3. Projection
4. Helmet strap buckle
To secure a helmet with the helmet
holding cable
1. Remove the passenger seat.
2. Remove the storage pouch and
cable.
EAU84590
3
2
1. Storage pouch
2. Helmet holding cable
3. Pass the helmet holding cable
through the buckle on the helmet
strap.
4. Loop the ends of the helmet hold-
ing cable around the projection on
the passenger seat.
5. Install
WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
1
2
the passenger seat.
[EWA10162]
4-26

Storage compartment

1
1. Storage compartment
The storage compartment is located
under the passenger seat. (See page
4-24.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When wash-
ing the vehicle, be careful not to let any
water enter the storage compartment.
WARNING
 Do not exceed the load limit of
1.5 kg (3 lb) for the storage com-
partment.
EAU14465
EWA10962