Starting A Warm Engine; Shifting - Yamaha CRUX REV YD110-1 2016 Owner's Manual

Starting a warm engine

Follow the same procedure as for
starting a cold engine with the excep-
tion that the starter (choke) is not re-
quired when the engine is warm.
Operation and important riding points
EAU16641

Shifting

2
1
ZAUE2571
1. Shift pedal
2. Neutral position
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the il-
lustration.
TIP
To shift the transmission into the
neutral position, press the shift
pedal down repeatedly until it
reaches the end of its travel.
Use your toe to shift down and
your heel to shift up.
EAUE2280
NOTICE
6-2
Even with the transmission in
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long dis-
tances. The transmission is
properly lubricated only when
the engine is running. Inade-
quate lubrication may damage
the transmission.
Always use the clutch while
changing gears to avoid dam-
aging the engine, transmission,
and drive train, which are not
designed to withstand
shock of forced shifting.
ECA10261
6
the