Operation And Important Riding Points; Starting And Warming Up A Cold Engine - Yamaha CRUX REV YD110-1 2016 Owner's Manual

Operation and important riding points

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
6
EAU15952
Starting and warming up a
cold engine
1. Turn the fuel cock lever to "ON".
2. Turn the key to "ON".
3. Shift the transmission into the
EWA10272
neutral position. The neutral indi-
cator light should come on. If not,
ask a Yamaha dealer to check the
electrical circuit.
4. Turn the starter (choke) on and
completely close the throttle. (See
page 4-7.)
5. Start the engine by pushing the
kickstarter lever down.
6. After starting the engine, move the
starter (choke) back halfway.
7. When the engine is warm, turn the
starter (choke) off.
TIP
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.
EAUE1271
NOTICE
For maximum engine life, never ac-
celerate hard when the engine is
cold!
6-1
ECA11043