Rear Wheel - Yamaha CRUX REV YD110-1 2016 Owner's Manual

Periodic maintenance and adjustment

Rear wheel

To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Disconnect the brake torque rod
from the brake shoe plate by re-
7
moving the cotter pin, the nut, the
washer and the bolt.
EAU25081
4
EAUE2661
5
EWA10822
ZAUE1520
1. Nut
2. Cotter pin
3. Brake torque rod
4. Washer
5. Bolt
3. Remove the bolts and collars from
the drive chain case.
2
2
ZAUE2626
1. Drive chain case
2. Bolt and collar
4. Unhook the drive chain case lock
1
2
3
ZAUE2627
1. Drive chain case lock
5. Remove the brake pedal free play
1
1
7-35
and remove the drive chain case.
1
adjusting nut, disconnect the
brake rod from the brake cam-
shaft lever, and remove the spring
and washer from the brake rod.