Applying Effects To Input Audio - Roland V-8HD Reference Manual

Applying Effects to Input Audio

You can modify the tonal character by applying effects to the audio input.
Using an effect preset
The V-8HD is equipped with effects that are adjusted for specific
environments. These are called "effect presets. "
The effect presets are created using a combination of three effects
(high-pass filter, compressor, equalizer).
Simply by selecting an effect preset, you can easily apply an effect
that's appropriate for your situation.
MEMO
5 When you switch presets, the settings of each effect are
overwritten.
5 If you want to make fine adjustments to a preset, use the
AUDIO INPUT menu to edit the high-pass filter, compressor, and
equalizer settings.
Since the noise gate (an effect that eliminates noise) is not
included in the presets, you'll need to make separate settings
for it.
For details on the effects, refer to p. 75.
1 .
Press the [MENU] button0"AUDIO INPUT"0select
"HDMI IN 1"–"HDMI IN 8" or "AUDIO IN," and press the
[VALUE] knob.
2 .
Use the [VALUE] knob to select "EFFECT PRESET,"
and press the [VALUE] knob.
3 .
Use the [VALUE] knob to select the effect preset,
and press the [VALUE] knob.
Value Explanation
DEFAULT For line input (default setting)
MEETING For meetings
INTERVIEW For interviews
AMBIENT MIC For capturing ambient sound
WINDY FIELD For capturing ambient sound in a windy area
DE-ESS & POPS SOFT For reducing sibilants
DE-ESS & POPS HARD For reducing plosives
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Use the [VALUE] knob to select "OK," and press the
[VALUE] knob.
The preset is loaded. When the operation is finished, the message
"COMPLETE" appears.
5 .
Press the [MENU] button to quit the menu.
Correcting a time difference between video and audio
(delay)
Here's how you can correct a time difference between the video and
audio by delaying the output of the input audio.
1 .
Press the [MENU] button0"AUDIO INPUT"0select
"HDMI IN 1"–"HDMI IN 8" or "AUDIO IN," and press the
[VALUE] knob.
2 .
Use the [VALUE] knob to select "DELAY," and press
the [VALUE] knob.
3 .
Use the [VALUE] knob to adjust the time by which
the audio is delayed, and press the [VALUE] knob.
Delay the audio output so that the audio and video match.
4 .
Press the [MENU] button to quit the menu.
Audio Operations
35