Starting / Stopping The Engine - Stihl FS 111 Instruction Manual

2
1
Loosen the screw (1).
N
Slide the carrying ring (2) along the
N
drive tube.
Tighten the screw (1) moderately.
N
Allow the unit to hang freely.
N
Check the position obtained:
N
Balanced positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
should just touch the ground.
N
FS 111, FS 111 R
Circular saw blades (B)
should "hover" about 20 cm (8 in)
N
above the ground.
When the correct balanced position has
been reached:
Tighten down the screw (1) on the
N
carrying ring firmly.
Disconnecting Machine from Harness
1
A
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Starting / Stopping the
Engine
Controls
B Version with Bike Handle
1
1
2
2
3
1
2
3
2
1
Throttle trigger lockout
Throttle trigger
Stop switch with Run and Stop
positions. Depress the stop switch
(...) to switch off the ignition – see
"Function of stop switch and ignition
system".
English
25