Zone Sensor Thermostat Connections - Trane Voyager RT-SVX17C-EN Installation Operation & Maintenance

Figure 11
Typical Field Wiring Requirements for VAV Control Options
Table 9-1
RTRM Zone Sensor/Thermostat Connections
INPUTS
ZSM INPUTS
CV/VAV
ZSM INPUTS
Remote Panels and Sensors
Constant Volume Control Options
The RTRM must have a zone sensor or conventional ther-
mostat to operate the rooftop unit. If using a zone sensor,
mode capability depends upon the type of sensor and/or re-
(CV ONLY)
mote panel selected to interface with the RTRM. The possi-
bilities are: Fan selection ON or AUTO, System selection
HEAT, COOL, AUTO, and OFF. Refer to Figure 9-1 for con-
ventional thermostat connections.
The following Constant Volume controls are
available from the factory for field installation.
25