Fitting The 2-Part Thermal Insulation Jacket - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Installation sequence
Installation
(cont.)

Fitting the 2-part thermal insulation jacket

Fig.5
Note
Ensure that no fleece remnants enter the cylinder
through the cylinder connections.
Clip fasteners on each cylinder side:
1500 l: 6 pce
2000 l: 9 pce
Note
This work requires 2 people.
1. At the back of the cylinder: Attach clip fasteners to
the edges of the right and left sections of the insula-
tion jacket. Place the thermal insulation jacket
around the cylinder body.
Note
Leave the clip fasteners in the first notch.
8
1.
4.
3.
2. At the front of the cylinder: Attach clip fasteners to
3. Push the clip fasteners at the back of the cylinder
4. Push the clip fasteners at the front of the cylinder
2.
the edges of the right and left sections of the insula-
tion jacket.
as close together as they will go.
as close together as they will go.