Preparing For Installation - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Preparing for installation

Connections
A
B
Fig. 1 Front
Thermometer sensor retainer
A
Thermometer (TH)
B
up to 4 pce (accessories)
Siting
!
Please note
To prevent material damage, site the buffer cyl-
inder in a draught-free room free from the risk of
frost.
Otherwise the buffer cylinder will have to be
drained if there is a risk of frost while it is not in
use.
Sensor well for thermometer sensor
*1
A
B
C
D
Fig. 2 Back
Heating water flow 1 (HF 1)
A
Heating water flow 2 (HF 2)/heating water return
B
(HR 1)
Heating water return (HR 2)
C
Heating water return (HR 3)
D
TR 1
E *1
F TR 2 *1
TR 3
G *1
H TR 4 *1
■ Provide adequate clearance from the wall so that the
temperature controller can be operated (if installed).
■ Placing the cylinder on a plinth will make the room
easier to clean.
Use the adjustable feet to level the buffer cylinder.
■
Note
Never extend the adjustable feet beyond a total length
of 30 mm.
Preparing for installation
A
E
B
F
C
G
D
H
5