Thermal Insulation On The Vitocell With Vitotrans; Fitting The Thermal Insulation Jacket - Viessmann VITOCELL 100-E Installation And Service Instructions Manual

Installation sequence

Thermal insulation on the Vitocell with Vitotrans

Fitting the thermal insulation jacket

Note
Ensure that no fleece remnants enter the heating
water buffer cylinder through the cylinder connections.
2.
Fig. 17
Note
2 people are required for the following work.
1. At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket. Place the thermal insula-
tion jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
20
1.
3.
2. Fit 4 clip fasteners above and 2 clip fasteners
behind the Vitotrans so that they are evenly
spaced.
3. Push the clip fasteners as close together as possi-
ble.