Fitting The 3-Part Thermal Insulation Jacket - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Installation sequence
Installation
(cont.)

Fitting the 3-part thermal insulation jacket

5.
3.
1.
4.
Fig.7
Note
Ensure that no fleece remnants enter the cylinder
through the cylinder connections.
Clip fasteners on each cylinder side:
1500 l: 6 pce
2000 l: 9 pce
Note
This work requires 2 people.
1. Push the thermal insulation jacket (central section)
between the cylinder connections and fit to the cyl-
inder body.
2. Attach clip fasteners to the left edge of the thermal
insulation jacket.
10
6.
2.
8.
3. Fit the 2nd thermal insulation jacket to the cylinder
4. Connect the two thermal insulation jackets together
5. Attach clip fasteners to the left edge of the 2nd ther-
6. Fit the next thermal insulation jacket to the cylinder
7.
body.
using the clip fasteners.
Note
Leave the clip fasteners in the first notch.
mal insulation jacket.
body.