Fitting The 2-Part Thermal Insulation; Fitting The Thermal Insulation Jacket Sections - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Fitting the 2-part thermal insulation

Fitting the thermal insulation jacket sections

!
Please note
The thermal insulation must not come into con-
tact with naked flames.
Exercise caution when welding and brazing
Note
2 people are required for the following work.
■
Ensure that no fleece remnants enter the heating
■
water buffer cylinder through the cylinder connec-
tions.
Fig. 5
1. At the back of the cylinder: Attach the clip fasten-
ers to the edges of the right and left thermal insula-
tion jacket sections. Place the thermal insulation
jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
2. At the front of the cylinder: Attach the clip fasteners
to the edges of the right and left thermal insulation
jacket sections.
Number of clip fasteners on each cylinder side
1500 l: 6 pce
2000 l: 9 pce
1.
4.
3.
3. Push the clip fasteners at the back of the cylinder
4. Push the clip fasteners at the front of the cylinder
2.
as close together as possible.
as close together as possible.
Installation sequence
11