Fitting The Thermal Insulation Jacket - Viessmann Vitocell 100-E Installation And Service Instructions For Contractors

Fitting the thermal insulation jacket

Note
Fleece remnants must not enter the heating water buf-
fer cylinder through the cylinder connections.
2.
Fig. 6
Note
2 people are required for the following work.
1. At the back of the cylinder: Attach 6 clip fasteners
to the edge profile of the right and left sections of
the thermal insulation jacket. Place the thermal
insulation jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
1.
3.
2. Fit 4 clip fasteners above and 2 clip fasteners
behind the Vitotrans so that they are evenly
spaced.
3. Push the clip fasteners as close together as they
will go.
Installation sequence
11