Speed Dial/Xfer; Sprecode Key - Mitel 6867i User Manual

Your System Administrator can configure a programmable key, top softkey, or expansion module
softkey as "Speed Dial/MWI" and defining call and voicemail URIs, users can monitor and listen
to pending messages on multiple voicemail accounts. When new messages are pending on a
monitored voicemail account, the corresponding Speed Dial/MWI key's LED blinks and the UI
displays the number of pending messages beside the defined label.
When you press the configured key, the phone sends an INVITE to the configured call URI that
you can use to listen to the new messages.

SPEED DIAL/XFER

The Speed Dial key allows a number to be dialed quickly by pressing one key configured for
speed dialing. The Transfer key allows a call to be transferred to other recipients blindly or
consultatively. The Speed Dial/Xfer key combines the Speed Dial and Transfer keys'
functionality together allowing the user to transfer calls or speed dial with one key.
Note: It is recommended that you enable the Switch UI Focus to Ringing Line
parameter when using the Speed Dial/Xfer feature. For more information about this
parameter, see
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed
Dial/Xfer key causes the phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the
Speed Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the
call (get the call back) by pressing the line key again.
• Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the
Speed Dial/Xfer key forwards the call to the predefined extension.

SPRECODE KEY

Your System Administrator can set a key to automatically activate specific services offered by
the server by setting a key to Sprecode. For example, if the sprecode value of *82 is configured,
then by pressing the key, *82 automatically activates a service provided by the server. The
value for this field is dependent on the services provided by the server. Contact your System
Administrator for information about available services.
"Switch UI Focus to Ringing Line"
IP Phone Keys
on page 88
.
Mitel | 80