Parking A Call; Retrieve A Parked Call; Phone Lock Key; Lock The Phone - Mitel 6867i User Manual

6867i User Guide for Clearspan
Administrators can configure the Park and Pickup keys for any line.
Use the following procedure on the IP phone to park a call and pick up a parked call.

PARKING A CALL

1. While on a live call, press the Park key.
2. After you hear the greeting from the CallPark server, enter the extension where you want
to park the call.
If the call is parked successfully, the response is either a greeting voice confirming that the
call was parked, or a hang up occurs. The parked call party hears music on hold.
3. If the call fails, you can pick up the call (using the next procedure) and press the Park key
again to retry Step 2.

RETRIEVE A PARKED CALL

1. Pick up the handset on the phone.
2. Enter the extension number where the call was parked.
3. Press the Pickup key.
If the call pick up is successful, you are connected with the parked call.

PHONE LOCK KEY

You can configure a key on the IP phone to use as a lock/unlock key. You assign the function
of the key as Phone Lock.
After an lock/unlock key is configured, refer to the following procedures to use the key on the
IP phone.

LOCK THE PHONE

Press the LOCK key. The phone locks. The LED for the key AND the Message Waiting Lamp
illuminate steady ON. An "Unlock" label appears next to the key you just pressed.

UNLOCK THE PHONE

1. Press the UNLOCK key.
A password prompt displays.
2. Enter your user password and press ENTER.
The phone unlocks. The LED for the key AND the Message Waiting Lamp go OFF. The
"Lock" label appears next to the key you just pressed.
73 | Mitel