Blf/List - Mitel 6867i User Manual

The following table shows BLF states on the phone and corresponding LED and icon behavior.
BLF STATE
Idle
Seized
Alerting (incoming call)
Active
Held

BLF/LIST

The BLF/List feature on the IP phones is specifically designed to support the Clearspan Busy
Lamp Field feature. This feature allows the IP phone to subscribe to a list of monitored users
defined through Clearspan.
In addition to monitoring the idle and busy state, the BLF/List feature also supports the ringing
and held state. When the monitored user is idle, the corresponding softkey is green. When the
monitored user's phone is ringing, the corresponding softkey turns yellow. When the monitored
user on an active call or is attempting to make a call, the corresponding softkey turns red. When
the monitored user's call is on hold, the corresponding softkey displays the BLF/List hold icon.
Additionally, the corresponding softkey LED illuminates to match the monitored user's state,
either off (idle), solid (busy), or fast flashing/slow flashing (ringing/on hold).
Notes: You can use a BLF/List-configured key to automatically dial out to the configured
extension. The Clearspan BLF feature is not the same as the Clearspan Shared Call
Appearance (SCA) feature and does not permit call control over the monitored extension.
BLF/List functionality can only be programmed on the left softkeys. Your System
Administrator must have BLF/List enabled on Clearspan. Contact your System
Administrator for more information.
The following table shows BLF states on the phone and the corresponding LED and icon
behavior.
BLF STATE
Idle
Seized
Alerting (incoming call)
Active
Held
LED BEHAVIOR
Off
Solid Red
Fast Flashing Red
Solid Red
Slow Flashing Red
LED BEHAVIOR
Off
Solid Red
Fast Flashing Red
Solid Red
Slow Flashing Red
IP Phone Keys
SOFTKEY ICON
SOFTKEY ICON
Mitel | 58